What to do if your Hard Disk Short DST Failed? What are the codes 0146, 0142, and 0141 faults, and what are the symptoms? In this user guide, we’ll go through everything!
The hard drive short DST is one of the most crucial indicators of a hard disk’s integrity. The long DST and the short DST are the two types of disc self-tests.
Both DSTs are drive processes that check the health and functionality of your computer. As a result, if a Drive start-up test failed message occurs in your system, it could cause a severe detour in your work.
If your long Disk Self-Test or hard disc short DST failure, TTR Data Recovery is here to help. In this piece, we’ll go through how to solve the hard disc drive short disc start-up test failed error in more detail.
What Does A failed Short Self-Test Mean?
Everything You Need to Know About Disk Self-Test Failed.
The Disk Self-Test (DST) is a built-in program on your computer that tests the physical integrity of your hard drive. Big-name laptop manufacturers, such as Dell and HP, provide hard drives with DSTs pre-installed, which will run tests every time your computer reboots.
A hard disc short DST test and a long drive start-up test focus on the primary components of your computer, such as read/write platters, control boards, motors, and ROM. This test ensures that all these essential components work properly.
The Implications Of a Hard Disk Short DST Failed
Users rarely notice whether the DST short test support for hard discs is active or when a Disk Self-Test fails. Only when a failed system error showing a “short DST failed error” occurs on your screen will you notice this. This hard drive failure error message frequently appears in conjunction with certain codes, such as 0146, 0142, and 0141 hard discs short DST failure error.
All these codes can only indicate that something is wrong with one of your hard disk’s primary portions. Fortunately, there is a professional hard drive data recovery service provider who can assist you with this issue.
These are the most important symptoms to be aware of.
If you see something like this on your screen, you’ve encountered a hard disc short, failed error message:
The number 0142.
Error Code: 2000-0142
Msg: Disc Drive 0 – self-test failed. The status is 79.
Hard drive failure can occur for a variety of causes, including logical problems or viruses. When not handled appropriately, both can be devastating to hard discs.
If the above notice appears, your computer will begin to malfunction in one of the following ways:
- Your PC is stuck on a blank screen.
- Computer’s hard drive isn’t working.
- Your computer is constantly restarting.
- The drive light flashes sporadically when it restarts.
- Your computer has simply stopped operating.
- An incorrect hard disc short DST failure error may signal that your hard disc drive is nearing its end of life.
Fortunately, there is still hope for your hard disc to be repaired.
Perform diagnostics to correct any hard disc hardware faults as soon as you discover the above-mentioned symptoms.
In the worst-case scenario, the hard disc drive may need to be replaced.
How do I fix a Hard Disk Short DST Failed ?
To correctly analyze short DST on the hard drive, it is highly suggested that you contact a hard disc tech professional. If you don’t have access to help, there are some simple fixes you can try.
1. Examine The Ide And Sata Cables
If a hard disc short DST failed error message appears on your workstation screen, check your IDE or SATA cables first. These are the cables that connect your hard disc to your computer’s motherboard. If the wires are loose or have deteriorated, it can have a significant impact on the performance of your PC.
If you want your data to flow smoothly from the drive to your computer, you’ll need a set of dependable IDE and SATA connections.
2. Inspect and repair the defective sections.
A third-party partition manager can be used to check for and repair problematic sectors.
Follow the directions to complete this approach. The steps will be provided by the software.
3. Scan And Repair DST Errors on the Common Disk Drive
You will need a Windows recovery CD to fix the hard disk short DST failed issue. This procedure is carried out in the Windows Repair Environment or at a command prompt.
- From the recovery drive, start Windows.
- Press “R” to bring up the Repair Windows screen.
- As an administrator, open the Command Prompt.
- “chkdsk c:/p/r” is the command to use.
- Press the Enter key.
- When you’re finished, type “exit” and your computer will reboot.
4. Restore Your Syestem to An Earlier Stage
Keep in mind that these quick fixes are arranged in order of difficulty in troubleshooting a disc drive DST short test failed problem, from the simplest to the most complicated. If the first three techniques failed, it’s time to revert your system to a previous state.
- Activate the Control Panel
- Select System, then System Protection.
- Select System Restore from the menu. This is available in the System Properties section.
- The wizard will walk you through the procedures of selecting a restore point.
- You can fix your disc short by reverting to a previous system state. If system problems caused the DST check to fail.
5.Change the disc drive
There are occasions when doing a system restore or restoring your recovery disc drive and system to a previous state is insufficient to resolve the problem. If this happens, it’s time to replace your present hard drive, and there are several different models to pick from!
If the previous approaches haven’t worked, you may be experiencing a hard disc DST short test error.
Conclusion: We learned why the HARD DISK 1 (3F1) error occurs and how to resolve it using HP’s built-in diagnostic tools and basic troubleshooting approaches. However, if you keep an eye on your hard drive health using SMART — an inbuilt disc monitoring program that comes bundled with new hard drives and SSDs — such mistakes can be avoided, and data loss situations can be easily averted. You can also run CHKDSK once or twice a month to maintain the health of your hard disc.
