Fix HP PC Error 601 Support

HP computers and laptops are among the most popular PCs on the market today. One of the problems that many HP users have is figuring out how to fix HP PC Error Code 601. This error was cause by an issue with the internal battery.

It indicates that the storage capacity of the PC battery is severely low and that it should replace. A useful feature is the HP battery alarm. Even if the PC battery is in good condition or purchased recently, the warning message allows HP users to replace it.

What does HP PC Error Code 601 mean?

The error message mentions the primary (internal) battery (601). It means the primary (internal) battery’s measured storage capacity is less than 25% of its original capacity. The system log records the error code associated with the number “601.”

Environmental factors such as low ambient operating temperatures or battery packaging could be to blame. It’s likely that temporarily relocating your system to a warmer location will resolve the issue.

What causes HP PC Laptop Error 601?

You have a few options for dealing with the problem. These tactics will provide a quick and straightforward way to correct the issue and straighten up what appears to be a jumbled mess. Some strategies that may be useful in fixing the challenge are as follows:

• The PC error code 601 that appears on HP notebooks indicates a battery issue.

• The remedy is as simple as unplugging and replunging the hardware that created the issue.

• Because this is an authentic HP battery alarm, carefully test this component before turning on your laptop.

• If nothing else works, replace the battery to fix the primary internal battery 601 issue.

HP PC Error Code 601: How to Fix It

Replace the battery in the device.

The most straightforward solution is to remove the battery and replace it. Here’s how you can do it:

• Turn your computer off.
• Remove the battery from your laptop.
• Unplug the computer from the power supply.
• After removing the battery, press and hold the power button for at least 25 seconds to drain any remaining electrical charge in the capacitors.
• Connect the power cord to your computer and replace the battery.
• Now is the time to turn on your laptop.
• If the problem notice persists after restarting your laptop, proceed to the following step.

Perform a battery test.

HP provides the HP Battery Health Check tool to assist you with battery testing. The HP Support Assistant, which comes preloaded on HP PCs running Windows 8, Windows 7, or Vista, is used to perform the battery test.

It can also be installed on systems that have been upgraded from Windows XP to Vista. To get the most recent version of the HP Battery test, go to the HP Support Assistant website and download and install the latest HP Support Assistant software. For further information, go to HP Self-Support Options.

To locate and execute HP Battery Check with HP Support Assistant, follow the steps below.

• For Windows versions prior to Windows 8, go to Start and type in HP Support Assistant.
• On Windows 10 and 8, look for and open HP Support Assistant, then choose the application.
• If you’re running Windows 8, choose Troubleshoot from the HP Support Assistant window, then Power, Thermal, Mechanical, or Battery and Performance.
• Go to this tab and click Battery and performance to evaluate your battery and see the results of your battery status check.
• From the drop-down menu, choose HP Battery Check.
• Examine the results to evaluate how the battery is performing.
• The current state of the battery, as well as any necessary instructions, are displayed.

Remove the battery from the HP laptop and run it without it.

You can use a simple approach to run your laptop without using a battery.

Laptops, whether Windows or MacBook, are typically designed to work with both battery and A/C (Alternative Current) adapters.

A laptop can function well even if the battery has been removed or is dead. As a result, you may charge your PC with standard household electricity.

Make sure you’re using the laptop’s original power adapter, though, because voltage fluctuations might cause serious motherboard damage.

Another option for resolving the issue of “How to resolve HP error code 601.” Without the battery, you can use your HP PCs. Here’s how you can do it:

• Turn off the computer first.
• Remove the battery and unplug the laptop from the power supply.
• After removing the battery, press and hold the power button for 20 seconds.
• Plug the power cord into your PC without the battery.
• Finally, restart your HP machine to determine whether the issue still exists.

Always use a backup power supply.

If you live in an area where high-intensity electrical loads are a problem, you should always use a UPS. It’s vital because if there’s a power outage, you won’t lose any work, and it also works as a surge protector.

Don’t leave the charging terminal open to the elements.

It is usually preferred to use a battery rather than direct AC power because utilizing a laptop without a battery exposes the charging ports on the bottom of the computer.

The power cord should never be removed.

The power supply cord should never be removed from your laptop since it can damage components and cause your machine to shut down altogether.

The Battery Contacts Must Not Be Touched

Touching the battery pin slots while the power supply is turned on is dangerous since it could cause a serious mishap.

Replace the battery in your computer.

Consider replacing the battery in your laptop. Due to a variety of causes, battery life may have decreased over time. Certified dealers and reputable organizations that offer computer components near you can provide you with a genuine HP battery.

It’s critical to ensure that the PC has a brand-new battery that hasn’t been harmed. It will safeguard you from using a faulty battery, which could affect the battery performance of your HP computer.

Any of the procedures given above can be used to resolve HP error 601. If nothing seems to work and the problem code persists, it’s always a good idea to consult a professional.

If your laptop battery malfunctions or no longer provides adequate energy life, you can readily replace it. Follow these steps to get started:

• Turn off your laptop and disconnect the AC adaptor.
• Any latches or other fasteners holding your battery in place should removed.
• By moving the old battery out of its compartment or storage place, it can be removed.
• Take the replacement battery out of the package.
• It needs to fit into the notch or bay.
• Close the safety clasp to keep it in place.
• Reconnect the AC adapter and charge the battery completely.

Note: Do not touch the battery contacts or connections within the bay; the oils on your fingertips may reduce the battery’s conductivity.

Some Tips to Extend the Life of Your HP Laptop Battery

Unplug the power adapter once your laptop is fully charging. Use it on battery power to extend the life of the battery and increase the lifespan of the device.

Additionally, if you plan to keep the computer for longer than a month, deplete the battery to 70% and remove it.

Take the battery out of your laptop and use it at home using a power adapter. Turn off any apps or processes that use a lot of CPU power, then enable your computer’s power-saving option, sometimes known as Eco mode.

Disconnect any laptop attachments that aren’t being used (Wi-Fi adapter, Bluetooth, mouse, and other external devices). Keep your laptop in a good working environment and out of direct sunlight.

In conclusion

To fix the PC error code 601 on HP laptop, users can use any of the options given above. Follow the above tips to learn more about increasing the life of laptop batteries. If none of the suggestions above help, you can contact HP.

Most frequently asked questions